Seat Belt Systems: Service Precautions
WARNING:^ ALL SAFETY BELT ASSEMBLIES INCLUDING RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT ASSEMBLIES (SLIDE BAR), SHOULDER BELT HEIGHT ADJUSTERS (IF SO EQUIPPED) CHILD SAFETY SEAT TETHER ATTACHMENTS AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL BELT ASSEMBLIES SHOULD BE REPLACED UNLESS A QUALIFIED TECHNICIAN FINDS THAT THE ASSEMBLIES SHOW NO DAMAGE AND OPERATE PROPERLY. BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED AND REPLACED IF EITHER DAMAGE OR IMPROPER OPERATION IS NOTED.
^ AFTER ANY VEHICLE COLLISION, THE SAFETY BELT SYSTEM AT ALL OUTBOARD SEATING POSITIONS (EXCEPT DRIVER, WHICH HAS NO "AUTOMATIC LOCKING RETRACTOR" FEATURE) MUST BE CHECKED BY A QUALIFIED TECHNICIAN TO VERIFY THAT THE "AUTOMATIC LOCKING RETRACTOR" FEATURE FOR CHILD SEATS IS STILL FUNCTIONING PROPERLY, IN ADDITION TO OTHER CHECKS FOR PROPER SAFETY BELT SYSTEM FUNCTION. A BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED IF THE SAFETY BELT ASSEMBLY'S "AUTOMATIC LOCKING RETRACTOR" FEATURE OR ANY OTHER SAFETY BELT FUNCTION IS NOT OPERATING PROPERLY WHEN CHECKED ACCORDING TO THE PROCEDURES IN THE WORKSHOP MANUAL. FAILURE TO REPLACE THE BELT AND RETRACTOR ASSEMBLY COULD INCREASE THE RISK OF INJURY IN COLLISIONS.