Sensor, Front

Removal

1. Remove the rotor shield.





2. Disconnect the front anti-lock brake sensor electrical connector.





3. Unclip the front anti-lock brake sensor wire from the vehicle frame.





4. Remove the bolt.





5. Remove the front anti-lock brake sensor.
1 Remove the bolt.
2 Remove the front anti-lock brake sensor.

Installation








1. NOTE: Plug the sensor mount opening and thoroughly clean the mounting surface. Apply High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A meeting Ford specification ESA-M1Cl98-A.

To install, reverse the removal procedure.