Headlamp: Service and Repair

REMOVAL







1. Position the parking lamp assembly aside.
1 Remove the screw.
2 Position the parking lamp assembly aside.

NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.







2. Remove the parking lamp assembly.
1 Disconnect the connectors.
2 Remove the parking lamp assembly.







3 Remove the screws.

NOTE: For the RH headlamp, position the relay box out of the way.







4. Position the headlamp assembly aside.
1 Remove the bolt.
2 Remove the nut.
3 Position the headlamp assembly aside.







5. Remove the headlamp assembly.
1 Disconnect the connectors.
2 Remove the headlamp assembly.

INSTALLATION












1. To install, reverse the removal procedure.
^ If necessary, adjust the headlamps.