System Readiness Test Access

Description
All OBD II diagnostic tools should display the System Readiness Test (SRT). The SRT will display the supported monitors on the vehicle and the status of all tests (complete or not complete) at that time. If any test is not complete, the diagnostic tools will identify which test has not completed. Fuel, misfire and comprehensive components are continuous tests and won't display complete or not complete.

Diagnostic Tool
1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the diagnostic tool to the OBD II DLC.
3. Turn key ON or start vehicle.
4. Select VEHICLE & ENGINE SELECTION menu (OPTIONAL).
5. Select NEW VEHICLE YEAR & MODEL.
6. Select year, engine, model with the appropriate qualifier, if needed (i.e., transmission, 49 state, California).
7. Follow operating instructions from the menu.
8. Select DIAGNOSTIC FUNCTIONS.
- Press TEST button to display SRT.

NOTE: If all the tests are not complete, the SRT will automatically be displayed along with the message: "NOT ALL SUPPORTED ON BOARD SYSTEM READINESS TESTS HAVE BEEN COMPLETED"

9. Select ON-BOARD SYSTEM READINESS.