Vehicle Damage Warnings

CAUTION:
^ Under no conditions should the jack or chassis stand come in contact with the suspension components. Severe damage to the vehicle could result.
^ The hoist must only contact the four vehicle lifting points.
^ Lifting the vehicle from points other than those specified may cause vehicle damage. Never lift the vehicle by the suspension components.
^ When using safety stands, position the front safety stands on the vehicle frame. Position the rear safety stands on the rear axle housing.
^ Never probe moving parts.
^ Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump will occur.
^ Do not twist or strain the powertrain/drivetrain mounts.
^ Make sure the system is warmed up to normal operating temperature, as thermal expansion can be the cause of a strain problem.
^ Do not install brake discs that are less than the minimum thickness specified. Do not machine a brake disc below the minimum thickness specification.
^ Do not use a bench lathe to machine brake discs.