Seats: Description and Operation

SEATS

Front Seats

NOTE: If a front seat has a loose or rocking condition, refer to "the power seat moves but is loose" in the symptom chart before installing new parts.

The front seats can be equipped with the following systems:
- Manual seat tracks
- Power seat tracks
- Heated seats
- Memory driver seat

Memory Seats

Memory Set Switch:

NOTE: Two memory seat modules are used, one for vehicles built up to 03/2002 and one for vehicles built 03/2002 onward. The modules are not interchangeable.

This system allows automatic positioning of the driver seat to three programmable positions.
- To program position one, move the driver seat to the desired position using the seat regulator control switch. Depress the set button. Within five seconds, depress button one.
- To program position two, repeat the previous procedure using button two.
- To program position three, repeat the previous procedure but depress buttons one and two simultaneously.
- To recall position one, depress button one.To recall position two, depress button two. To recall position three, depress button one and two simultaneously.

A position can only be recalled when the transmission selector is in PARK or NEUTRAL. A position may be programmed at any time.

Heated Seats

NOTE: Two heated seat modules are used, one for vehicles built up to 03/2002 and one for vehicles built 03/2002 onward. The modules are not interchangeable.

This system allows the electrical heating of the front seats on passenger demand.

The components of the system are:
- the seat heating elements located in the seat cushion and backrest.
- the heated seat module located on the seat cushion frame.
- the heated seat control switch, located on the seat side trim panel.
- temperature sensors located in the seat heating elements.

Rear Seats

Second Row Seating
The following second row seating configurations are available:
- 40/20/40 Rear Seat.
- 60/40 Rear Seat.

Third Row Seating
A folding bench seat is available for third row seating.