Without Message Center

1. Determine which magnetic zone you are in for your geographic location.

NOTE: The compass zone setting is preset from the factory to Zone 8.

2. Turn the Ignition key to the ON position.







3. Locate the compass module at the base of the mirror. Press the button located on the compass sensor module gently until ZONE and the current zone setting (1-15) is displayed in the compass display and release the button.
4. Press the button repeatedly to cycle through the possible zone settings until the setting for your geographic location is displayed.
5. Release the button to exit the zone setting mode. After approximately five seconds the display will report the direction and the zone Will be set.