Instrument Cluster (IC)
INSTRUMENT CLUSTERRemoval and Installation
1. CAUTION: Prior to removal of module, it is necessary to upload module configuration to the diagnostic tool.
Depower the supplemental restraint system (SRS).
2. Remove the instrument cluster finish panel.
3. Lower the tilt column to the lowest position.
4. Remove the instrument cluster.
1. Remove the screws.
2. Disconnect the electrical connectors.
5. If equipped with automatic transmission, disconnect the transmission range selector and remove the instrument cluster.
6. CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the diagnostic tool into the new module.
To install, reverse the removal procedure.