Reverse Servo Assembly

Reverse Servo Assembly

Disassembly





1. Remove the control valve spring retainer.





2. Remove the reverse servo spring and check valve.





3. NOTE: Tabs on servo plate mate with slots on cover every 120 degrees.

Remove the reverse servo plate by turning in either direction to release.
^ Align arrow on servo plate with any slot on cover.





4. Remove the reverse servo spring.





5. Remove the reverse servo piston and seal assembly.
Inspect the seal for damage, install new reverse servo piston if necessary.





6. Inspect and install a new reverse servo piston seal if damaged.

Assembly





1. Install reverse servo piston and seal assembly.





2. Install the reverse servo spring.





3. CAUTION: The arrow on the servo plate must be aligned evenly between any two slots on the cover.

Install the reverse servo plate.





4. Install the reverse servo spring and check valve.





5. Install the control valve spring retainer.