Vehicle Damage Warnings

CAUTION:
^ Support the quarter window glass before removing the window glass hinge nuts. If the quarter window glass is not supported, it may fall and break or cause damage to the vehicle.
^ Care must be taken to avoid scratching the pinch weld.
^ After installing the new urethane-installed glass, the vehicle should not be driven until the urethane adhesive has cured. The curing time at temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours (Refer to the Essex drive away chart for the cure times as temperatures and humidity vary). Inadequate curing of the urethane adhesive may adversely affect the strength of the urethane adhesive bond.
^ Wipe off the urethane glass prep immediately after each application because it flash dries. Apply deliberate strokes, making sure not to overlap the applied area.
^ Open the windows to prevent the liftgate window glass from being pushed out by air pressure if a door is closed.
^ Support the liftgate window glass before removing the hydraulic support/lift cylinders. If the liftgate window glass is not supported, it may slam slam and break or cause damage to the vehicle.