Exterior

EXTERIOR MIRROR

NOTE: RH side is shown. LH side is similar.

REMOVAL












1. Remove the components in the order indicated in the illustration and table. To remove individual components, only carry out the listed steps.

Item 1: Exterior Mirror Electrical Connector Removal Note
1. Remove the front door trim panel.

Item 4: Exterior Mirror Glass Removal Note
1. Position exterior mirror glass in the full UP position.
2. Locate the notch at the bottom of the exterior mirror glass.







3. Release the exterior mirror glass.
1 Insert a long flat-bladed screwdriver in the notch.
2 Push the screwdriver into the notch until the glass is released.
4. If equipped with heated mirrors, disconnect electrical connectors from the exterior mirror glass.

Item 6: Exterior Mirror Motor Removal Note







1. Disconnect the exterior mirror motor electrical connectors.

INSTALLATION
1. To install, reverse the removal procedure.

Item 4: Exterior Mirror Glass Installation Note
1. If equipped with heated mirrors, connect the electrical connector to the mirrors.
2. Position the exterior mirror glass on the mirror motor.
3. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the mirror glass in place until it is fully seated.