Fuel Filter: Service and Repair

FUEL LINES AND FUEL FILTER - 4.OL SOHC

Special Tool(s):

SPECIAL TOOL(S)

REMOVAL

1. WARNING:
- Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable mixtures are always present and can be ignited, resulting in possible personal injury.
- Fuel in the fuel system remains under high pressure even when the engine is not running. Before servicing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire hazard.

Disconnect the battery ground cable.

2. Release the fuel system pressure.












3. Remove the components in the order indicated in the illustration and table. To remove individual components, only carry out the listed steps.

Item 2: Spring Lock Coupling Removal Note







1. Install the spring lock coupling disconnect tool.







2. Press the spring lock coupling disconnect tool into the open end of the cage.







3. Separate the fuel line fitting.

Item 7: Push Connect Fitting Removal Note







1. Disconnect the safety clip from the fuel line.







2. Install the special tool and press it into the fitting.







3. Separate the fittings.

Items 9 and 10: Quick Connect Fitting Removal Note







1. Unclip the tab.







2. Depress the tabs and press the clip downward.







3. Separate the fittings.

INSTALLATION
1. To install, reverse the removal procedure.

Item 7: Push Connect Fitting Installation Note







1. NOTE: Lubricate the fuel fitting with clean engine oil.

Align the fuel line fitting and press together until a click is heard.
- Pull on the fitting to make sure it is fully engaged, then install the safety clip.

Item 2: Spring Lock Coupling Installation Note







1. Clean and inspect the coupling ends and lubricate the O-rings with clean engine oil.