Camshaft, Engine
CamshaftTheoretical valve lift @ 0 lash 12 mm
Lobe lift 6.584 mm (0.259 inch)
Allowable lobe lift loss 0.127 mm (0.005 inch)
Journal diameter 27.935 - 27.96 mm (1.099 - 1.101 inch)
Camshaft journal bore inside diameter 28.0 - 28.03 mm (1.102 - 1.104 inch)
Camshaft journal-to-bearing clearance 0.04 - 0.095 mm (0.002 - 0.004 inch)
Runout 0.05 mm (0.002 inch)
End play 0.075 - 0.185 mm (0.0003 - 0.007 inch)
RH Camshaft Bearing Cap Bolts
NOTE: The camshaft bearing caps must be installed in the original position.
NOTE: After installing the bolts, check the camshaft for free rotation.
Position the oil supply tube, the camshaft bearing caps, and the bolts.
Tighten the bolts in the sequence shown in two stages.
Tighten the bolts to 6 Nm (53 inch lbs.).
Tighten the bolts to 16 Nm (12 ft. lbs.).
LH Camshaft Bearing Cap Bolts
NOTE: The camshaft bearing caps must be installed in the original position.
NOTE: After installing the bolts, check the camshaft for free rotation.
Position the oil supply tube, the camshaft bearing caps, and the bolts.
Tighten the bolts in the sequence shown in two stages.
Tighten the bolts to 6 Nm (53 inch lbs.).
Tighten the bolts to 16 Nm (12 ft. lbs.).