Rear

Stabilizer Bar and Link - Rear
1. Remove the wheel and tire assemblies.
2. Remove the components in the order indicated in the following illustration and table.





3. To install, reverse the removal procedure.

Item 7: Stabilizer Bar Removal Note

1. CAUTION: Do not damage the boot while separating the ball joint from the knuckle.





Remove the nut and detach the RH upper ball joint.

2. CAUTION: Do not allow the brake caliper to hang from the hose or damage to the hose can occur.





Remove the bolts and position the brake caliper aside.





3. Unclip the vapor line from the fuel tank.





4. From the RH side of the vehicle, remove the stabilizer bar.