20 Percent, Second Row

REAR SEAT BACKREST - 20 PERCENT, SECOND ROW

DISASSEMBLY
1. Remove the second row, 20 percent seat.
2. Remove the second row, 20 percent seat backrest.












3. Disassemble the components in the order listed in the illustration and table. To remove individual components, carry out only the steps.

Item 3: Release Handle Bezel Disassembly Note







1. Access the material down and remove the screw.
2. Open the handle and remove the bezel.

Item 4: Head Restraint Sleeves Disassembly Note







1. NOTE:
- The inboard and outboard head restraint sleeves are not interchangeable.
- The head restraint sleeves incorporate an alignment tab that must face forward when installed.

Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.

Item 5: Backrest Trim Cover Disassembly Note

1. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.

Separate the hook and loop fasteners.

Item 6: Release Handle Disassembly Note







1. Remove the screw and remove the bezel.

ASSEMBLY
1. To assemble, reverse the disassembly procedure.