Intermediate Shaft Speed Sensor
Intermediate Shaft Speed SensorNOTE: Lubricate the sensor O-ring with petroleum jelly prior to installing the sensor.
1. On 4x4 vehicles, remove the front driveshaft.
2. For 4x2 vehicles, with the vehicle in PARK, position on a hoist.
3. Remove the shift cable and bracket.
4. Remove the components in the order indicated in the illustration and table.
5. To install, reverse the removal procedure.
Item 3: Speed Sensor Removal Note
1. Remove the intermediate shaft speed sensor.
1 Remove the intermediate shaft speed sensor screw.
2 Remove the intermediate shaft speed sensor from the transmission.
^ Inspect the intermediate shaft speed sensor O-ring for damage. If damaged, install a new O-ring.
Item 3: Speed Sensor Installation Note
1. Inspect and lubricate the O-ring with petroleum jelly.
1 Install the intermediate shaft speed sensor into the transmission.
2 Tighten the screw.