Diagnostic Strategies
DUAL AUTOMATIC TEMPERATURE CONTROL MODULE - DIAGNOSTIC METHODSThe dual automatic temperature control system must be diagnosed by first retrieving any DTCs, if present.
- An on-demand (hard fault) DTC indicates that the fault is currently present. An on-demand DTC suggests a wiring fault, disconnected connector, or component failure.
- A continuous (intermittent) DTC alone (corresponding on-demand DTC is not present) indicates that the fault is an intermittent condition and may not be currently present. A continuously only DTC suggests a poor wiring connection, loose pin or terminal, or intermittent component failure.
On-demand (hard fault) or continuous (intermittent fault) DTCs can be retrieved using a diagnostic tool. If using a diagnostic tool, refer to the diagnostic tool operating manual.
On-demand DTCs can also be retrieved by carrying out the Dual Automatic Temperature Control Module on-demand Self-Test. To retrieve and/or clear continuous DTCs carry out the Dual Automatic Temperature Control Module - Retrieve Continuous DTCs procedure. Always carry out the Dual Automatic Temperature Control Module on-demand Self-Test before retrieving continuous DTCs. Dual Automatic Temperature Control Module Self-Test Dual Automatic Temp. Module - Retrieve Continuous DTCs
If no DTCs are present, GO to Symptom Chart for the appropriate diagnostic action. Symptom Related Diagnostic Procedures