Rear Camber Adjustment

Rear Camber Adjustment

1. NOTE: The lower arm rearward mounting bolt has a set shim that must be removed and replaced with a washer (W-705040-S426) to allow for the adjustment of the arm in the frame slot.





Remove the nut and the set shim.
^ Discard the nut and set shim.
- Install the washer (W-705040-S426) and the nut and snug the nut.

2. NOTE: A prybar may be used between the lower arm and the frame pocket to aid in moving the arm outward.





To decrease the camber, move the lower arm outward.

3. NOTE: Adjustable pliers may be used to aid in moving the arm inward.





To increase the camber, move the lower arm inward.





4. Tighten the nut.
5. Check and, if necessary, adjust the rear toe.