Sliding Door Handle: Service and Repair
SLIDING DOOR HANDLESHeavy Duty Riveter:
SPECIAL TOOL(S)
REMOVAL
NOTE: Right side shown, left side similar.
1. Remove the sliding door trim panel.
Part 1:
Part 2:
2. Remove parts in the order indicated in the illustration and table.
To remove individual parts, only carry out the listed steps.
Item 4: Sliding Door Remote Control Removal Note
1. Open the clip and disconnect the exterior sliding door handle actuating rod.
2. Open the clip and disconnect the interior sliding door handle actuating cable.
Item 12: Rivet Removal Note
1. Remove the rivet.
Item 14: Rivet Removal Note
1. Remove the interior sliding door handle.
- Remove the rivets and slide the interior handle forward.
INSTALLATION
1. To install, reverse the removal procedure.
Item 14: Rivet Installation Note
1. Using the special tool, install the new rivets.
Item 12: Rivet Installation Note
1. Using the special tool, install the new rivets.