Test C

PINPOINT TEST C: DTC B1870 - AIR BAG WARNING INDICATOR CIRCUIT SHORT TO BATTERY

Test C1:

Test C2:

Test C2-C3:

Test C4:

Test C5:

Normal Operation
During normal operation, the air bag indicator will illuminate continuously for approximately 6 seconds and then go out after the ignition switch is placed in the ON or START position and no air bag faults exist. The air bag indicator will remain illuminated continuously after three cycles of a lamp fault code (LFC), if a fault exists.

If the restraints control module detects a short to battery on the air bag warning indicator circuit, it will store diagnostic trouble code (DTC) B1870 in memory. If any other DTCs are active with this DTC, the secondary air bag warning chime will be activated.

Possible Causes
An air bag indicator circuit short to battery can be caused by:
- faulted wiring, terminals, or connectors.
- a faulted instrument cluster module.
- a faulted RCM.