Vehicle Damage Warnings
CAUTION:- Before installing a new safety belt assembly, inspect the mounting area for damage and distortion. If the retractor of a new safety belt assembly has been bolted into a damaged or distorted mounting area, the retractor could be warped and may not function. If this is the case, remove the retractor and return the sheet metal to the original configuration and install another complete safety belt assembly.
- Do not deactivate the safety canopy module circuit by removing the safety canopy bridge resistor from the safety canopy electrical connector.
- Do not deactivate the side air bag module circuit by removing the side air bag bridge resistor from the side air bag floor electrical connector.