Reactivate
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION AND REACTIVATIONSpecial Tool(s):
SPECIAL TOOL(S)
Reactivation
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the deactivation procedure.
NOTE: Make sure the battery negative cable is still disconnected before proceeding with the reactivation portion of this procedure.
All vehicles
1. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat safety belt buckle pretensioner electrical connector.
2. Connect the driver seat safety belt buckle pretensioner electrical connector.
1 Connect the driver seat safety belt buckle pretensioner electrical connector.
2 Slide and engage the driver seat safety belt buckle pretensioner electrical connector locking clip.
Vehicles with safety canopies and seat side air bags
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat side air bag module electrical connector.
4. Connect the driver seat side air bag module electrical connector.
1 Connect the driver seat side air bag module electrical connector.
2 Slide and engage the driver seat side air bag module electrical connector locking clip.
5. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy module electrical connector.
6. From between the headliner and the roof of the vehicle, just to the front of the C-pillar, connect the driver side safety canopy module electrical connector.
7. Position the coat hook and install the screw.
8. Install the coat hook cover.
9. Install the C-pillar trim panel.
1 Position and install the C-pillar trim panel.
2 Attach the quarter trim panel.
3 Attach the weather-strip.
10. Position the safety belt guide and install the bolt.
11. Install the safety belt guide cover.
All vehicles
12. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger seat safety belt buckle pretensioner electrical connector.
13. Connect the passenger seat safety belt buckle pretensioner electrical connector.
1 Connect the passenger seat safety belt buckle pretensioner electrical connector.
2 Slide and engage the passenger seat safety belt buckle pretensioner electrical connector locking clip.
Vehicles with safety canopies and seat side air bags
14. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger seat side air bag module electrical connector.
15. Connect the passenger seat side air bag electrical connector.
1 Connect the passenger seat side air bag electrical connector.
2 Slide and engage the passenger seat side air bag electrical connector locking clip.
16. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side safety canopy module electrical connector.
17. Connect the passenger side safety canopy module electrical connector.
18. Install the D-pillar trim panel.
1 Position and install the D-pillar trim panel.
2 Attach the quarter trim panel.
3 Attach the weather-strip.
19. Position the attachments and install the screws.
20. Position the safety belt guide and install the bolt.
21. Install the safety belt guide cover.
All vehicles
22. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
23. Through the glove compartment opening, connect the passenger air bag module electrical connector.
24. Close the glove compartment.
25. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
26. Through the steering wheel access door opening, connect the driver air bag module electrical connector and attach it to the retainer.
27. Close the steering wheel access door.
28. Connect the battery.
29. WARNING: Restraint system diagnostic tools are for service only. Tools must be removed prior to operating the vehicle over the road. Failure to remove restraint system diagnostic tools could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). Prove Out Procedure
Vehicles with safety canopies and seat side air bags
30. Check the active restraint system for correct operation.