Test K

PINPOINT TEST K: THE AUTOLOCK DOES NOT OPERATE CORRECTLY

Test K1-K4:

Normal Operation
The autolocking function will cause the vehicle to automatically lock all the doors when the following conditions are all concurrently met during the current key cycle:
- all doors are closed
- autolocking function is active
- key in ON
- all doors are closed
- autolocking function is active
- key in ON position
- transmission in DRIVE or REVERSE position (automatic transmission)
- parking brake is not set (manual transmission)
- vehicle speed exceeds 5 km/h (3 mph)

After the initial activation of autolocking, autolocking will be activated again if the same conditions are concurrently met again.

Possible Causes
- door ajar switch
- smart junction box (SJB)