Bench Seat, Second Row

REAR SEAT BACKREST - BENCH SEAT, SECOND ROW

DISASSEMBLY
1. Remove the bench seat, second row.
2. Remove the bench seat backrest, second row.












3. Disassemble the parts in the order listed in the illustration and table.

To remove individual parts, only carry out the listed steps.

Item 5: Head Restraint Disassembly Note







1. Slide the head restraint sleeve button and remove the head restraint.

Item 6: Head Restraint Sleeves Disassembly Note







1. Release the J-clip.







2. NOTE: The inboard and outboard head restraint sleeves are not interchangeable.

Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.

Item 8: Seat Backrest Trim Cover Disassembly Note

1. Slide down to remove the backrest hardboard panel.

2. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.

Separate the hook and loop fasteners.







3. Remove and discard the hog rings and remove the backrest trim cover.

ASSEMBLY
1. To assemble, reverse the disassembly procedure.