Vehicle Damage Warnings
CAUTION:- Some fuel will remain in the fuel filler pipe after draining the fuel tank. Carefully drain the fuel pump module/filler pipe into an appropriate container.
- When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector retaining clip area before separating the tube.
- The fuel pump module must be handled carefully to avoid damage to the float arm and filter.
- Make sure the fuel tube clicks into place when installing the tube. To make sure the tube is fully seated, pull on the tube.
- Fuel injection equipment is manufactured to very precise tolerances and fine clearances. It is therefore essential that absolute cleanliness is observed when working with these components. Always install blanking plugs to any open orifices or tubes.