Third Row

REAR SEAT - THIRD ROW

REMOVAL

Part 1:

Part 2:

1. Remove the parts in the order listed in the illustrations and table.

Item 1: Cushion Release Levers Removal Note







1. Release the two levers located at the lower outboard edges of the seat cushion, lift the cushion up and pull the cushion out.

Item 5: Rear Seat Third Row Backrest-to-Floor Outer Bolts Removal Note
1. Fold the third row seat backrest down and remove the rear load floor panel.







2. Access the backrest to floor attachments.
1 Release the trim fabric hook and loop fasteners.
2 Remove the wheel jack storage cover.

3. Remove the jack assembly.
4. Remove the two outer load floor support panel bolts and the load floor support panel.

INSTALLATION
1. To install, reverse the removal procedure.
2. Check the active restraint system for correct operation.