Vehicle Damage Warnings
CAUTION:- Do not deactivate the side air curtain module or safety canopy module circuit by removing the bridge resistor from the electrical connector.
If the side air curtain or safety canopy bridge resistor is removed, an open circuit fault will be generated by the restraints control module (RCM).
If a restraint system diagnostic tool is installed at the side air curtain or safety canopy electrical connector, a low resistance fault will be generated.
- The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module. Match the electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air bag module.
- Installing a J-nut in place of a weld nut is not a recommended repair.
- If the safety canopy module has deployed, the tether cord rivet nut must be inspected and replaced if damaged before installing a new safety canopy.