Battery Cables, Battery, and Battery Tray

BATTERY

REMOVAL

WARNING: When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to spew through the vent caps resulting in personal injury, damage to the vehicle or to the battery. Lift with a battery carrier or with your hands on opposite corners. Failure to follow these instructions may result in personal injury.

1. Disconnect the battery.

Part 1:

Part 2:

Part 1:

Part 2:

2. Remove the parts in the order indicated in the illustration and table. To remove individual parts, only carry out the listed steps.

Item 1: Starter Solenoid Terminals Protective Cap Removal Note
1. Raise and support the vehicle.

Item 18: Harness Locator Removal Note
1. Lower the vehicle.

Item 20: Generator B+ Terminal Nut Removal Note
1. Position the generator B+ terminal protective cover aside.

Item 23: Battery Junction Box (BJB) Nut Removal Note
1. Open the battery junction box cover to access the battery junction box nut.

INSTALLATION
1. To install, reverse the removal procedure.