Attachment II - Labor and Parts Information

LABOR ALLOWANCES

TOOL REQUIREMENTS

Rotunda Tool 501-040 is required to complete the ball stud bracket replacement. Each dealer will be provided one applicator tool 501-040 at no charge. Tools have been mailed and should have arrived at all dealerships by December 1, 2004. The tool shipping container will indicate "Enclosed Adhesive Applicator Tool for Safety Recall 04S20.

[NEW] PARTS REQUIREMENTS / ORDERING INFORMATION





Repair kits for this program will be shipped as seed stock to dealers beginning the week of 12/6/04 based on each dealer's involved vehicle population. The intent of the seed stock is to provide each dealer with a fair share of their facing depot's inventory. Orders will be issued as stock orders. We will continue to seed repair kits until order restrictions can be removed. We anticipate the removal of restrictions by mid-January 2005; announcement will be via a DOES II message. For repair kit requirements exceeding the dealer's seed stock allocation, contact the Special Service Support Center to order; please note that a VIN must be supplied.

ORDER INFORMATION

The DOR/COR for this program is 50330. This number identifies parts ordered for this Safety Recall through the Special Service Support center.

DEALER PRICE

For latest prices, refer to DOES II.

PARTS RETENTION AND RETURN

Follow the provisions of the Warranty and Policy Manual for 'Parts Retention and Return Procedures."

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.