Crankshaft, Engine

Crankshaft maximum end play 0.130-0.301 mm (0.0051-0.0118 inch)
Diameter-surface finish (RMS) 0.2- 0.6 Microns
Diameter-out-of-round limit mm (inch) 0.015 (0.0006)
Diameter-out-of-round service limit mm (inch) 0.020(0.00079)
Diameter-taper service limit mm (inch) 0.006 (0.00023)
Main bearing journal diameter 67.483-67.503 mm (2.65-2.657 inch)
Main bearing journal maximum taper 0.020 mm (0.0007 inch)
Main bearing journal maximum out-of-round 0.05 mm (0.002 inch)
Main bearing journal-to-cylinder block clearance 0.025-0.045 mm (0.0009-0.0018 inch)