Block Heater

Block Heater





Material

Removal and Installation
1. Drain the cooling system.
2. With the vehicle in NEUTRAL, position it on a hoist.





3. Remove the parts in the order indicated in the illustration and table.
4. To install, reverse the removal procedure.
5. Fill and bleed the cooling system.

Item 2: Block Heater Retaining Screw Removal Note

1. CAUTION: Do not loosen the block heater retaining screw more than necessary for removal.

Loosen the block heater retaining screw.

Item 3: Block Heater Installation Note
1. Clean and inspect the engine block mating surface before installing the block heater. Lubricate the block heater seal and the cylinder block hole with clean engine coolant to ease installation.

Item 1: Block Heater Power Cable Installation Note
1. Make sure the power cable is routed and secured away from rotating or hot components or damage to the cable can occur.