Test H

PINPOINT TEST H: LFC 19 AND 21/DTC B2293 - RESTRAINT SYSTEM AIR BAG STATUS

Test H1:

Test H2:

Test H2-H4:

Test H4-H6:

Test H6-H8:

Test H8-H10:

Test H10-H12:

Test H12-H13:

Test H14-H16:

Test H16-H18:

Test H18-H19:

Test H20-H22:

Test H22-H24:

Test H24-H25:

Test H26-H28:

Test H28-H29:

Test H30-H32:

Test H32-H33:

Test H34-H36:

Test H36-H37:

Test H38:

Test H38-H39:

Normal Operation
The restraints control module (RCM) checks all of the front air bag circuits for faults. If the RCM detects one of the following faults on any of the front air bag circuits, it will store diagnostic trouble code (DTC) B2293 in memory and, depending on the fault, flash either lamp fault code (LFC) 19 or 21 (or higher priority code if one exists) on the air bag indicator.

Fault Conditions
The RCM monitors for the following fault conditions:
- low resistance.
- circuit open.
- circuit short to voltage.
- circuit short to ground.

Possible Causes
A driver air bag status fault can be caused by:
- damaged wiring, terminals, or connectors.
- a faulty clockspring.
- a faulty driver air bag module.
- RCM is faulted.

A passenger air bag status fault can be caused by:
- damaged wiring, terminals, or connectors.
- a faulty passenger air bag module.
- RCM is faulted.