Sensor, Rear
Rear Wheel Speed SensorRemoval and Installation
1. Disconnect the battery.
2. Raise and support the vehicle.
3. On vehicles equipped with anti-lock brake system (ABS) only, remove the parts in the order indicated in the following illustration and table.
4. On vehicles equipped with ABS with stability assist, remove the parts in the order indicated in the following illustration and table.
5. To install, reverse the removal procedure.
Item 1 (ABS With Stability Assist): Electrical Connector Removal Note
1. Remove the rear wheel and tire.
Item 4 (ABS Only): O-Ring Installation Note
1. Install a new O-ring.
Item 1 (ABS Only): Electrical Connector
Installation Note
1. Apply electrical grease to the connector terminals.