Instrument Cluster / Carrier: Service and Repair

INSTRUMENT CLUSTER

REMOVAL

CAUTION:
- Prior to removal of the module, it is necessary to upload module configuration information to the diagnostic tool. This information needs to be downloaded into the new module once installed.
- Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.

1. Lower the tilt steering column to the lowest position.
2. Remove the instrument cluster finish panel.







3. Remove the parts in the order indicated in the illustration and table.

Item 5: Instrument Cluster Lens Removal Note
1. Release the tabs on the top and bottom of the instrument cluster and remove the lens.

INSTALLATION
1. To install, reverse the removal procedure.

Item 4: Instrument Cluster Installation Note
1. Following installation of the new instrument cluster, download the module configuration information from the diagnostic tool into the new module.