Crankshaft Position Sensor: Service and Repair

CRANKSHAFT POSITION (CKP) SENSOR

REMOVAL
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Remove the drive belt from the A/C compressor pulley.







4. Remove the parts in the order indicated in the illustration and table.

Item 3: A/C Compressor Bolt Removal Note
1. It is not necessary to remove the A/C compressor bolts. Loosen the bolts enough to slide the compressor down one inch, allowing access for crankshaft position (CKP) sensor removal.

INSTALLATION
1. To install, reverse the removal procedure.