Liftgate Latch Remote Control

LIFTGATE LATCH REMOTE CONTROL

Removal and Installation
1. Remove the liftgate trim panel.







2. Disconnect the liftgate latch remote control actuating rods.
1 Open the clip and disconnect the liftgate window latch actuating rod.
2 Open the clip and disconnect the liftgate latch actuating rod.







3. Open the clip and disconnect the liftgate handle actuating rod.







4. Disconnect the electrical connectors.
1 If equipped, disconnect the liftgate latch actuator electrical connector.
2 Release the liftgate window latch ajar switch wiring harness locator.







5. Remove the liftgate latch remote control assembly.
- Remove the screw and 2 nuts.
- To install, tighten the nuts to 7 Nm (62 lb-in).
- To install, tighten the screw to 3 Nm (27 lb-in).

6. To install, reverse the removal procedure.
- Transfer all necessary components.