Lower Arm

Lower Arm

Removal and Installation

NOTE: LH is shown, RH is similar.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the lower ball joint nut and separate the lower ball joint from the wheel knuckle.
^ To install, tighten to 103 Nm (76 ft. lbs.).

3. NOTE: Tighten the lower arm inner bolt with the weight of the vehicle on the ground.

Remove the lower arm inner bolt and the lower arm.
^ To install, tighten to 115 Nm (85 ft. lbs.).
4. To install, reverse the removal procedure.