Clearing Trouble Codes
On-Board Diagnostics With Diagnostic ToolNOTE: For detailed instructions and other diagnostic methods using the scan tool, refer to Computers and Control Systems or scan tool instruction guide.
NOTE: If using a generic scan tool, refer to Computers and Control Systems for instructions on carrying out On-Board Diagnostics procedures.
The Quick Tests can be used to diagnose the powertrain control module, sensors, and actuators of this transaxle.
The following is a guide for using the On-Board Diagnostic (OBD) Quick Tests and the scan tool.
^ Quick Test 1.0 - Visual Inspection
^ Quick Test 2.0 - Set Up
^ Quick Test 3.0 - Key On Engine Off
^ Quick Test 4.0 - Continuous Memory
^ Quick Test 5.0 - Key On Engine Running
^ Special Test Mode Mode
- Wiggle Test Mode
- Output Test Mode
^ PCM Reset Mode
^ Clearing DTCs
^ OBD II Drive Cycle
^ Other Scan Tool Features
Other diagnostic methods include the following:
^ Parameter identification (PID) access mode, used to monitor sensors and actuators.
^ Freeze frame data access mode, used to view emission-related data values from specific PIDs.
^ Oxygen sensor monitor mode, used to monitor the oxygen sensor.