Rear Seat Cushion Cover - Third Row

REAR SEAT CUSHION COVER - THIRD ROW

Removal and Installation
1. Remove the third row seat.
2. Remove the third row backrest.







3. Remove the screws and pin-type retainers and remove the latch covers (1 shown).







4. Release the J-clips.

5. CAUTION: Use care when separating the seat upholstery from the hook and loop strip or the hook and loop strip can be torn from the seat backrest foam pad.

Separate the hook-and-loop fasteners.

6. Remove and discard all the hog rings and remove the cushion trim cover.
7. To install, reverse the removal procedure.