Sunroof / Moonroof: Description and Operation

ROOF OPENING PANEL

The roof opening panel consists of the following:
- Air deflector
- Overhead console
- Headliner trim piece
- Roof opening panel motor
- Roof opening panel module (located above the headliner)
- Roof opening panel
- Roof opening panel shield
- Roof opening panel shield spring-loaded guide feet (can be installed separately from shield)
- Roof opening panel frame
- Rail assembly corner insert (can be installed separately from frame)
- Mechanism foot (can be installed separately from frame)
- Mechanism pin (can be installed separately from frame)
- Mechanism E-clip (can be installed separately from frame)
- Roof opening panel switch
- Roof opening panel drain hose

Mechanism Pin and E-Clip







NOTE: These components can be serviced separately from the roof opening panel frame assembly.

Mechanism Foot Assembly







NOTE: These components can be serviced separately from the roof opening panel frame assembly.

To align the mechanism foot assembly, adjust mechanism foot to where it makes contact to the roof opening panel frame, then tighten the mechanism foot screw.

Roof Opening Panel
The roof opening panel is an electronically operated panel that can be opened or closed by depressing switch located inside the vehicle on the overhead console. It also has a one-touch open feature.

When the roof opening panel switch is rocked rearward, the roof opening panel moves back into the storage space between the headliner and the panel (50202).

The roof opening panel can be moved to the FULLY CLOSED position by rocking the switch forward and holding it until the roof opening panel is fully closed.

When the roof opening panel is in the FULLY CLOSED position, the rear portion can be raised to the VENT position to provide ventilation by rocking the switch forward. The roof opening panel can be closed by rocking the switch rearward.