Rear Seat Backrest - Second Row, 40 Percent E-Z Entry and Quad Bucket

REAR SEAT BACKREST - SECOND ROW, 40 PERCENT E-Z ENTRY AND QUAD BUCKET







Disassembly and Assembly
1. Remove the second row, 40 percent E-Z entry seat.
2. Remove the second row, 40 percent E-Z entry seat backrest.
3. Remove the head restraint.

4. CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat backrest foam pad.

Separate the hook and loop fasteners and invert the trim cover as high as it will go.







5. NOTE:
- The inboard and outboard head restraint sleeves are not interchangeable.
- The head restraint sleeves incorporate an alignment tab that must face forward when installed.

Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.

6. Remove the seat backrest trim cover.
7. Remove the seat backrest foam pad from the backrest frame.
8. To assemble, reverse the disassembly procedure.