Pressure Feedback Exhaust Sensor: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE







Exploded View

Removal and Installation
1. Disconnect the EGR system module electrical and vacuum connectors.
2. Disconnect the exhaust gas recirculation (EGR) system module-to-exhaust manifold tube upper fitting.
- To install, tighten to 40 Nm (30 lb-ft).







3. NOTE: When installing the new EGR module gasket, install with the side with the raised circle facing the throttle body adapter.

Remove the bolts, the EGR system module and the gasket. Discard the gasket.
- To install, tighten to 25 Nm (18 lb-ft).

4. NOTE: The EGR system module sealing surfaces are soft metals.

Carefully clean the EGR system module gasket sealing surfaces.

5. To install, reverse the removal procedure.
- Install a new EGR system module gasket.