Test C: Single Power Window Is Inoperative - Passenger Front Window

PINPOINT TEST C: SINGLE POWER WINDOW IS INOPERATIVE - PASSENGER FRONT WINDOW

C1-C2:

C2-C3:

C3-C4:

C4-C5:

Normal Operation
Under normal operation the passenger front window control switch receives power from the driver window control switch through circuit 170 (RD/LB). The passenger front window control switch provides power to the power window motor through circuit 334 (RD/YE) and ground through circuit 333 (YE/RD) to operate the passenger front window down, and power through circuit 333 (YE/RD) and ground through circuit 334 (RD/YE) to operate the passenger front window up.

When operating the passenger front window using the driver window control switch, power is sent to the passenger front window control switch through circuit 314 (TN/LB) and ground through circuit 313 (WH/YE) to operate the passenger front window down, and power through circuit 313 (WH/YE) and ground through circuit 314 (TN/LB) to operate the passenger front window up.

Possible Causes
- Open in circuits 170 (RD/LB), 313 (WH/YE), 314 (TN/LB), 333 (YE/RD) or 334 (RD/YE).
- Inoperative driver window control switch
- Inoperative passenger front window control switch
- Inoperative passenger front window motor