Passive Anti-Theft System (PATS)

PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET

Special Tool(s):

Special Tool(s)

1. Connect the diagnostic tool.
2. Key in the ON position.
3. Carry out the security access procedure for the PCM.

4. NOTE: Do not carry out the ignition key code erase.

Enter the powertrain control module (PCM) parameter reset mode on the diagnostic tool.

5. Carry out the security access procedure for the transmission control module (TCM).
6. Enter the TCM parameter reset mode on the diagnostic tool.
7. Key in the OFF position for a minimum of 3 seconds.
8. Key in the ON position for a minimum of 3 seconds.
9. CLEAR the diagnostic trouble codes (DTCs).
10. Key in the OFF position for a minimum of 3 seconds.