Transfer Case - Manual Transaxle

Transfer Case - Manual Transaxle





1. With the vehicle in NEUTRAL, position it on a hoist.





2. Remove the drain plug and drain the transaxle fluid.
3. Remove the driveshaft.





4. Remove the 4 bolts and the crossmember brace.





5. Remove the 2 transfer case-to-transaxle bolts.





6. Remove the 2 transfer case-to-transaxle nuts.





7. Using a suitable stud remover, remove the front stud.





8. Pull the transfer case outward, off the rear stud. Maneuver the transfer case away from the exhaust and remove from the vehicle.





9. If necessary, clean the threads of the front stud.





10. Remove and discard the O-ring seal.