Door Adjustment - Front
DOOR ADJUSTMENT - FRONTLH and RH side
NOTE: Make sure the rear door is within specification before making any adjustments to the front door. Refer to Specifications. Specifications
1. Remove the fender.
2. Mark the positions of the front door hinges to use as reference points.
3. Loosen the 3 front door hinge-to-body bolts.
4. Remove the A-pillar lower trim panel.
1 Remove the pin-type retainer.
2 Remove the A-pillar lower trim panel.
RH side
5. Position the inertia fuel shutoff (IFS) switch bracket aside.
1 Remove the 2 bolts.
2 Position the bracket aside.
LH and RH side
6. Loosen the lower door hinge bolt just enough to permit movement.
7. Adjust the front door to specification.
8. Tighten the 4 front door hinge-to-body bolts.
RH side
9. Install the IFS bracket.
1 Position the bracket.
2 Install the 2 bolts.
LH and RH side
10. Install the A-pillar lower trim panel.
1 Position the A-pillar lower trim panel.
2 Install the pin-type retainers.
11. Install the fender.