Test F: The Stoplamps Are Inoperative

PINPOINT TEST F: THE STOPLAMPS ARE INOPERATIVE

F1-F3:

F3-F5:

F6:

Normal Operation
The stoplamp switch is supplied voltage from the smart junction box (SJB) through circuit 10 (LG/RD). When the brake pedal is applied, the stoplamp switch routes voltage to circuit 810 (RD/LG) back to the SJB. Circuit 810 (RD/LG) is then routed out of the SJB to the brake shift interlock solenoid. The SJB monitors voltage input from the stoplamp switch. When the SJB senses brake pedal application, the SJB then sends voltage to the stoplamps.

Possible Causes
- Fuse
- Circuit 10 (LG/RD) open
- Circuit 810 (RD/LG) open
- Stoplamp switch
- SJB