TPMS Indicator and Message Center Messages

TPMS Indicator and Message Center Messages
The TPMS indicator and vehicle message center (if equipped) sometimes displays faults that cannot be resolved by the customer. Treat these messages as TPMS faults that must be serviced.

TPMS Indicator Illuminates Continuously
The TPMS indicator remains on continuously for this condition:

1. NOTE: If the spare tire is in use, the damaged road tire must be repaired and installed on the vehicle to restore complete TPMS functionality before carrying out any diagnosis.

Low Tire Pressure - The TPMS indicator is illuminated solid and the message center displays LOW TIRE PRESSURE (if equipped). This is displayed when any of the tire pressures are low. When this condition exists, the tire pressure must be adjusted to the recommended cold pressure as indicated on the vehicle certification label and the table above. Adjust the air pressure in the tires.

TPMS Indicator Flashes
The TPMS indicator flashes (flashes 20 to 30 seconds) after bulb-check for these conditions:
1. Tire Pressure Sensor Fault - If equipped, the message center will display TIRE SENSOR FAULT when a tire pressure sensor is malfunctioning. GO to Symptom Chart. Symptom Related Diagnostic Procedures
2. No communication with the SJB (TPMS is integral to the SJB) - The TPMS indicator is illuminated when the instrument cluster has received no signals from the SJB for more than 5 seconds. If equipped, the message center displays TIRE MONITOR FAULT. GO to Symptom Chart. Symptom Related Diagnostic Procedures
3. Tire Pressure Monitor Fault - If equipped, the message center will display TIRE MONITOR FAULT when the tire pressure monitoring system is malfunctioning. GO to Symptom Chart. Symptom Related Diagnostic Procedures