Test K: The LH or RH Power Sliding Door (PSD) Module Does Not Respond To The Diagnostic Tool

PINPOINT TEST K: THE LH OR RH POWER SLIDING DOOR (PSD) MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

K1-K2:

K3:

Normal Operation
The RH PSD module and the LH PSD modules are both connected to the international standards organization (ISO) 9141 communication network, circuit 70 (LB/WH). Check the network circuit between the PSD module in question and the data link connector (DLC) C251. The total resistance value must not be more than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the ISO 9141 communication network, damage to the DLC C251, damage to the PSD module connector, or a problem in the in-line connector.

Possible Causes
- ISO 9141 circuit 70 (LB/WH) open
- LH PSD module C3072a or RH PSD module C3071a
- LH PSD module or the RH PSD module