Principles of Operation
Principles of OperationPower Steering
The power steering system uses a CIII power steering vane-type pump to pump the fluid from the reservoir to the rack-and-pinion steering gear. The power steering pump is mounted to the engine and driven by a drive belt from the crankshaft of the engine. Power steering fluid is pulled into one side of the pump from the reservoir by vacuum. The minimum vacuum required is 68 - 84 kPa (20 - 25 in-Hg). The power steering fluid is then trapped and squeezed into a smaller area inside the pump. This action pressurizes the fluid at the output, as it flows to the rest of the system. A pressure relief/flow valve is built into the pump to control the maximum pressure. The relief pressure is between 9,650 - 10,550 kPa (1,450 - 1,580 psi). This action prevents damage to the system during different engine speeds. The power steering fluid while under pressure flows through the high pressure power steering line to the rack and pinion steering gear.